SNMP Command Set
Configuring SNMP MIB Views
5-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display configuration information for the SNMP MIB view “internet”:
Table 5-8 provides an explanation of the command output. For details on using the
set snmp view command to assign variables, refer to Section 5.2.4.2.
Matrix>show snmp view internet
View Name: internet
Subtree OID: 1
View Type: Included.
Row Status: active
Storage Type: nonvolatile
Table 5-8 show snmp view Output Details
Output What It Displays...
View Name Name assigned to a MIB view.
Subtree OID Subtree object identifier.
View Type Whether or not subtree use must be included or excluded
for this view.
Row Status Status of this entry: active, notInService, or notReady.
Storage Type Whether storage is in nonvolatile or volatile memory
To Next Page
Loading...
Need help?
General