SNMP Command Set
Configuring SNMP Notification Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-53
Example
This example shows how to display the SNMP notify information:
Table 5-12 shows a detailed explanation of the command output.
Matrix>show snmp notify
--- SNMP notifyTable information ---
Notify name = 1
Notify Tag = Console
Notify Type = trap
Storage type = nonVolatile
Row status = active
Notify name = 2
Notify Tag = TrapSink
Notify Type = trap
Storage type = nonVolatile
Row status = active
Table 5-12 show snmp notify Output Details
Output What It Displays...
Notify name A unique identifier used to index the SNMP notify
table.
Notify Tag Name of the entry in the SNMP motify table.
Notify Type Type of notification: SNMPv1 or v2 trap or
SNMPv3 InformRequest message.
Storage Type Whether access entry is stored in volatile,
nonvolatile or read-only memory.
Row Status Status of this entry: active, notInService, or
notReady.
To Next Page
Loading...