SNMP Command Set
Configuring SNMP Notification Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-61
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete SNMP notify profile “area51”:
profile Specifies an SNMP filter notify name to delete.
targetparam
targetparam
Specifies an associated entry in the
snmpTargetParamsTable.
Matrix>clear snmp notifyprofile area51 targetparam v3ExampleParams
To Next Page
Loading...