Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-5
• set spantree bridgehellomode (Section 6.2.1.19)
• clear spantree bridgehellomode (Section 6.2.1.20)
• set spantree hello (Section 6.2.1.21)
• clear spantree hello (Section 6.2.1.22)
• set spantree maxage (Section 6.2.1.23)
• clear spantree maxage (Section 6.2.1.24)
• set spantree fwddelay (Section 6.2.1.25)
• clear spantree fwddelay (Section 6.2.1.26)
• show spantree autoedge (Section 6.2.1.27)
• set spantree autoedge (Section 6.2.1.28)
• clear spantree autoedge (Section 6.2.1.29)
• show spantree legacypathcost (Section 6.2.1.30)
• set spantree legacypathcost (Section 6.2.1.31)
• clear spantree legacypathcost (Section 6.2.1.32)
• show spantree tctrapsuppress (Section 6.2.1.33)
• set spantree tctrapsuppress (Section 6.2.1.34)
• clear spantree tctrapsuppress (Section 6.2.1.35)
• show spantree txholdcount (Section 6.2.1.36)
• set spantree txholdcount (Section 6.2.1.37)
• clear spantree txholdcount (Section 6.2.1.38)
• set spantree maxhops (Section 6.2.1.39)
• clear spantree maxhops (Section 6.2.1.40)
To Next Page
Loading...