VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-49
This example shows how to set the leave timer value to 300 centiseconds for all the ports on all the
VLANs:
This example shows how to set the leaveall timer value to 20000 centiseconds for all the ports on
all the VLANs:
Matrix>set garp timer leave 300
Matrix>set garp timer leaveall 20000
To Next Page
Loading...