Policy Classification Configuration Command Set
Configuring Policy Profiles
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 8-3
Command Mode
Read-Only.
Example
This example shows how to display policy information for profile 1, which is named “netadmin”.
This profile is currently active and has PVID and COS override functions disabled:
Table 8-1 provides an explanation of the command output.
t
Matrix>show policy profile 1
Profile Index : 1
Profile Name : netadmin
Row Status : Active
Port Vid Status : Enabled
Port Vid : 1
COS Status : Disabled
COS : 0
SummaryAdminId : fe.0.1
SummaryOperId : fe.0.1
Table 8-1 show policy profile Output Details
Output What It Displays...
Profile Index Number of the profile entry.
Profile Name User-supplied name assigned to this profile entry.
Row Status Whether or not the profile is enabled (active) or disabled.
Port Vid Status Whether or not PVID override is enabled or disabled for
this profile.
Port Vid PVID assigned to the PVID override function.
COS Status Whether or not Class of Service override is enabled or
disabled for this profile.
COS Class of Service value enabled or disabled for override.
SummaryAdminId Ports administratively assigned to this policy profile.
SummaryOperId Ports currently operating with this policy profile.
To Next Page
Loading...
Need help?
General