IGMP Configuration Command Set
Reviewing IGMP Groups
10-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Table 10-1 provides details of the command output.
This example shows the display when no IGMP groups have been configured on the device:
Table 10-1 show igmp groups Output Details
Output What It Displays...
Vlan ID VLAN segment configured for IGMP.
Multicast IP IP address associated with the VLAN ID through which all
multicast traffic is forwarded.
Type Protocol type, which is IGMP.
IGMP Port List Port designation(s) wishing to receive multicast
transmissions. For a detailed description of possible
port-string values, refer to Section 4.1.2.
Matrix>show igmp groups
Multicast group list processed.
To Next Page
Loading...
Need help?
General