Logging and Network Management Command Set
Configuring System Logging
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-15
Command Mode
Read-Only.
Example
This command shows a portion of the information displayed with the show logging application
command. For a full list of supported applications, refer to Table 11-3.
Table 11-2 provides an explanation of the command output.
Matrix>show logging application
Application Current Severity Level
---------------------------------------------
1 default
2 Syslog 5
3 rtrFE 5
4 RtrCfg 5
5 etsVlan 5
6 SSH 5
7 rtrDvmrp 5
8 rtrOspf 5
-- More --
To Next Page
Loading...