Logging and Network Management Command Set
Managing Switch Network Addresses
11-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Commands
Commands to manage switch network addresses are listed below and described in the associated
section as shown.
• show arp (Section 11.2.3.1)
• set arp (Section 11.2.3.2)
• clear arp (Section 11.2.3.3)
• show rad (Section 11.2.3.4)
• set rad (Section 11.2.3.5)
• show mac (Section 11.2.3.6)
• set mac (Section 11.2.3.7)
• clear mac (Section 11.2.3.8)
• show mac agingtime (Section 11.2.3.9)
• set mac agingtime (Section 11.2.3.10)
• clear mac agingtime (Section 11.2.3.11)
• show port stopaging (Section 11.2.3.12)
• set port stopaging (Section 11.2.3.13)
• clear port stopaging (Section 11.2.3.14)
• set mac algorithm (Section 11.2.3.15)
• show dns (Section 11.2.3.16)
• set dns domain (Section 11.2.3.17)
• clear dns domain (Section 11.2.3.18)
• set dns server (Section 11.2.3.19)
• clear dns server (Section 11.2.3.20)
• clear dns (Section 11.2.3.21)
• ping (Section 11.2.3.22)
• traceroute (Section 11.2.3.23)
• set mac multicast (Section 11.2.3.24)
• show mac multicast (Section 11.2.3.25)
To Next Page
Loading...