Logging and Network Management Command Set
Managing Switch Network Addresses
11-54 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
This example shows how to ping IP address 10.1.10.1 with 10 packets:
This example shows a continuous ping of IP address 10.1.10.1. In this case, entering Ctrl+C after 9
iterations caused command execution to stop:
Matrix>ping 10.1.10.1 10
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
------ PING 10.1.10.1: Statistics ------
10 packets transmitted, 10 packets received, 0% packet loss
Matrix>ping -s 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
Reply from 10.1.10.1
PING 10.1.10.1: Statistics
9 packets transmitted, 9 packets received, 0% packet loss
To Next Page
Loading...
Need help?
General