Logging and Network Management Command Set
Configuring Node Aliases
11-68 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example (a portion of the command output) shows how to display node alias properties for all
ports:
Table 11-7 provides an explanation of the command output.
Matrix>show nodealias
Alias ID = 24117248 Active = true
Interface = ge.0.6 Time = 0 days 00:02:52
Vlan ID = 1 MAC Address = 00-e0-63-26-ea-c9
Protocol = bootpc(8) Address =
Address Text =
Alias ID = 17301504 Active = true
Interface = ge.0.6 Time = 0 days 00:04:52
Vlan ID = 1 MAC Address = 00-01-f4-9e-54-cd
Protocol = ip(1) Address = 0a 02 f0 01
Address Text = 10.2.240.1
Table 11-7 show nodealias Output Details
Output What It Displays...
Alias ID Alias dynamically assigned to this port.
NOTE: Node aliases are dynamically assigned
upon packet reception to ports enabled with an alias
agent, which is the default setting on Matrix E1
Series devices. Node aliases cannot be statically
created, but can be deleted using the clear node
alias command (Section 11.2.5.5).
Active Whether or not this node alias entry is active.
Interface Port designation.
Time Time this since this entry was created.
Vlan ID VLAN ID associated with this alias.
MAC Address MAC address associated with this alias.
Protocol Networking protocol running on this port.
Address / Address
Text
When applicable, a protocol-specific address associated with
this alias.
To Next Page
Loading...
Need help?
General