Startup and General Configuration Summary
Factory Default Settings
3-6 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Telnet Enabled (outbound and inbound). Listening port is set to 23.
Maximum number of inbound, outbound, or SSH sessions allowed is
set to 4.
Terminal CLI display set to 79 columns and 23 rows.
Timeout Set to 5 minutes.
User names Login accounts set to ro for Read-Only access; rw for Read-Write
access; and admin for Super User access.
VLAN classification Classification rules are automatically enabled when created.
VLAN dynamic egress Disabled.
VLAN ID All ports use a VLAN identifier of 1, and are included on the host
VLAN ID 1 port VLAN list.
WebView Enabled.
WebView port Set at TCP port number 80.
Table 3-2 Default Device Settings for Router Mode Operation
Device Feature Default Setting
Access groups (IP
security)
None configured.
Access lists (IP
security)
None configured.
Area authentication
(OSPF)
Disabled.
Area default cost
(OSPF)
Set to 1.
Area NSSA (OSPF) None configured.
Area range (OSPF) None configured.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
Need help?
General