Startup and General Configuration Summary
Factory Default Settings
3-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MD5 authentication
(OSPF)
Disabled with no password set.
MTU size Set to 1500 bytes on all interfaces.
OSPF Disabled.
OSPF cost When OSPF is enabled, set to 10 for all OSPF interfaces.
OSPF network None configured.
OSPF priority Set to 1.
Passive interfaces
(RIP)
None configured.
Proxy ARP Enabled on all interfaces.
Receive interfaces
(RIP)
Enabled on all interfaces.
Retransmit delay
(OSPF)
Set to 1 second.
Retransmit interval
(OSPF)
Set to 5 seconds.
RIP Enabled.
RIP receive version Set to accept both version 1 and version 2.
RIP send version Set to version 1.
RIP timers Update timer set to 30 (seconds); invalid timer set to 180; hold down
timer set to 120; flush timer set to 300.
RIP offset No value applied.
Split horizon Enabled for RIP packets without poison reverse.
Stub area (OSPF) None configured.
Telnet Enabled (inbound and outbound).
Table 3-2 Default Device Settings for Router Mode Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
Need help?
General