1-22
remotehelp
Syntax
remotehelp [ protocol-command ]
View
FTP client view
Parameters
protocol-command: FTP protocol command.
Description
Use the remotehelp command to display the help information about an FTP protocol command.
This command works only when the FTP server provides the help information about FTP protocol
commands.
z This command is always valid when an H3C series Ethernet switch operates as the FTP server.
z If you use other FTP server software, refer to related instructions to know whether the FTP server
provides help information about FTP protocol commands.
Examples
# Display the syntax of the user command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>
rename
Syntax
rename remote-source remote-dest
View
FTP client view
Parameters
remote-source: Name of a file on a remote host.
remote-dest: Destination file name.
Description
Use the rename command to rename a file on a remote FTP server.
If the destination file name conflicts with the name of an existing file or directory, you will fail to rename
the file.
To Next Page
Loading...
Need help?
General