EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #699 background imageLoading...
Page #699 background image
2-7
By default, the unauthorized DHCP server detection function is disabled
Related commands: dhcp server, display dhcp-server.
Examples
# Enter system view
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Enable the unauthorized-DHCP server detection function on the DHCP relay agent.
[Sysname] dhcp-server detect
dhcp-server ip
Syntax
dhcp-server groupNo ip ip-address&<1-8>
undo dhcp-server groupNo
View
System view
Parameters
groupNo: DHCP server group number, ranging from 0 to 19.
ip-address&<1-8>: IP address of the DHCP server. &<1-8> indicates that up to eight IP addresses can
be input, with any two IP addresses separated by a space.
Description
Use the dhcp-server ip command to configure the DHCP server IP address(es) in a specified DHCP
server group.
Use the undo dhcp-server command to remove all DHCP server IP addresses in a DHCP server
group.
Related commands: dhcp-server, display dhcp-server.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Configure three DHCP server IP addresses 1.1.1.1, 2.2.2.2, and 3.3.3.3 for DHCP server group 1, so
that this group contains three DHCP servers (server 1, server 2 and server 3).
[Sysname] dhcp-server 1 ip 1.1.1.1 2.2.2.2 3.3.3.3
display dhcp-security
Syntax
display dhcp-security [ ip-address | dynamic | static | tracker ]

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals