4-14
rtr: 1 net: 0 sumasb: 0 sumnet: 1
Routing Table:
Intra Area: 1 Inter Area: 0 ASE: 0
Table 4-4 Description on the fields of the display ospf cumulative command
Field Description
Type
Type of input/output OSPF packet:
Hello: Hello packet
DB Description: Database Description packet
Link-State Req: Link-State Request packet
Link-State Update: Link-State Update packet
Link-State Ack: Link-State Acknowledge packet
Input Number of received packets
IO Statistics
Output Number of transmitted packets
ASE Number of all ASE LSAs
Checksum Sum Checksum of ASE LSA
Originated Number of originated LSAs
LSAs
Received Number of received LSAs generated by other routers
Router Number of all Router LSAs
SumNet Number of all Sumnet LSAs
SumASB Number of all SumASB LSAs
Neighbors Number of neighbors in this area
Interfaces Number of interfaces in this area
Spf Number of SPF computation count in this area
Area
rtr, net, sumasb,
sumnet
Number of all LSAs in this area
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
Routing Table
ASE Number of external routes
display ospf error
Syntax
display ospf [ process-id ] error
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
To Next Page
Loading...
Need help?
General