EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #727 background imageLoading...
Page #727 background image
1-5
Table 1-2 Description on the fields of the display drv qacl_resource command
Field Description
block
On the front panel,
z From left to right, every four columns of FE ports (total of eight FE ports)
represents a block numbered starting from 0. That is, 0 indicates Ethernet
1/0/1 to Ethernet 1/0/8, 1 indicates Ethernet 1/0/9 to Ethernet 1/0/16, and
2 indicates Ethernet 1/0/17 to Ethernet 1/0/24.
z Every GE port represents a block numbered starting from 6. That is, 6
indicates GigabitEthernet 1/1/1, 7 indicates GigabitEthernet 1/1/2, 8
indicates GigabitEthernet 1/1/3, and 9 indicates GigabitEthernet 1/1/4.
used-mask Number of the used masks
used-rule Number of the used rules
spare-mask Number of the remaining masks
spare-rule Number of the remaining rules
# Apply ACL 2001 to port GigabitEthernet 1/1/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface GigabitEthernet 1/1/1
[Sysname-GigabitEthernet1/1/1] packet-filter inbound ip-group 2001
Applying Acl 2001 rule 0 failed! Reason: Resource unavailable!(GigabitEthernet1/1/1)
The above output information shows that the application failed because there is no available rule
resource on port GigabitEthernet 1/1/1.
display packet-filter
Syntax
display packet-filter { interface interface-type interface-num | unitid unit-id }
View
Any view
Parameters
interface interface-type interface-number: Displays information about packet filtering on the specified
port.
unitid unit-id: Displays information about packet filtering on the specified unit (when the switch is in a
fabric) or packet filtering on all ports of the current switch (when the switch is not in a fabric). In the
former case, the unit-id argument is in the range 1 to 8; in the latter case, the unit-id argument can only
be 1.
Description
Use the display packet-filter command to display information about packet filtering.
Examples
# Display information about packet filtering on all ports of a switch that is not in a fabric.
<Sysname> display packet-filter unitid 1

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals