4-13
display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf cumulative command to display cumulative OSPF statistics.
Examples
# Display cumulative OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics
Type Input Output
Hello 0 10430
DB Description 0 0
Link-State Req 0 0
Link-State Update 0 0
Link-State Ack 0 0
ASE: 0 Checksum Sum: 0
LSAs originated by this router
Router: 180 SumNet: 116
LSAs Originated: 296 LSAs Received: 0
Area 0.0.0.0:
Neighbors: 0 Interfaces: 0
Spf: 2 Checksum Sum 15B27
rtr: 1 net: 0 sumasb: 0 sumnet: 1
Area 0.0.0.1:
Neighbors: 0 Interfaces: 1
Spf: 3 Checksum Sum 383C
rtr: 1 net: 0 sumasb: 0 sumnet: 0
Area 0.0.0.2:
Neighbors: 0 Interfaces: 0
Spf: 1 Checksum Sum 15D26
To Next Page
Loading...
Need help?
General