1-1
1 Common Multicast Configuration Commands
The following are new features in this set of manuals:
z Enabling multicast packet buffering. The related commands are multicast storing-enable and
multicast storing-packet.
z Configuring multicast source lifetime. The related command is source-lifetime.
z Configuring IGMPv3 Snooping functions. The related commands are igmp-snooping version and
igmp host-join.
z Configuring IGMP Snooping nonflooding. The related command is igmp-snooping
nonflooding-enable
.
z Configuring static member ports. The related commands are multicast static-group interface and
multicast static-group vlan.
z Configuring static router ports. The related commands are multicast static-router-port and multicast
static-router-port vlan
.
z Configuring VLAN tags of query messages. The related command is igmp-snooping vlan-mapping.
Common Multicast Configuration Commands
display mac-address multicast static
Syntax
display mac-address multicast static [ [mac-address ] vlan vlan-id ] [ count ]
View
Any view
Parameters
mac-address: Displays the static multicast MAC entry information for the specified MAC address.
Without this argument provided, this command displays the information of all static multicast MAC
entries in the specified VLAN.
vlan vlan-id: Displays the static multicast MAC entry information in the specified VLAN. Without a VLAN
specified, this command displays the static multicast MAC entry information in all VLANs.
count: Displays the number of static multicast MAC entries.
Description
Use the display mac-address multicast static command to display the information about the
multicast MAC address entry or entries manually configured on the switch.
To Next Page
Loading...
Need help?
General