H3C S3600 Series Command Manual

1-12
View
User view
Parameters
None
Description
Use the pwd command to display the current working path of the login user.
Examples
# Display the current working path.
<Sysname> pwd
unit1>flash:
rename
Syntax
rename fileurl-source fileurl-dest
View
User view
Parameters
fileurl-source: Original path name or file name of a file in the Flash memory.
fileurl-dest: Target path name or file name.
Description
Use the rename command to rename a file or a directory.
If the target file name or directory name is the same with any existing file name or directory name, you
will fail to perform the rename operation.
Examples
# Rename the file config.txt to config.bak.
<Sysname>rename config.txt config.bak
Rename unit1>flash:/config.txt to unit1>flash:/config.bak?[Y/N]:y
.
%Renamed file unit1>flash:/config.txt to unit1>flash:/config.bak.
reset recycle-bin
Syntax
reset recycle-bin [ file-url ] [ /force ]
reset recycle-bin [ /fabric ]
View
User view

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English