About This Manual
Organization
H3C S3600 Series Ethernet Switches Command Manual-Release 1602 is organized as follows:
Part Contents
1 CLI
Introduces the commands used for switching between the
command levels and command level setting.
2 Login
Introduces the commands used for logging into the Ethernet
switch.
3 Configuration File Management
Introduces the commands used for configuration file
management.
4 VLAN Introduces the commands used for configuring VLAN.
5 IP Address and Performance
Introduces the commands used for IP address configuration
and IP performance configuration.
6 Voice VLAN Introduces the commands used for voice VLAN configuration.
7 GVRP Introduces the commands used for GVRP configuration.
8 Port Basic Configuration Introduces the commands used for basic port configuration.
9 Link Aggregation Introduces the commands used for link aggregation.
10 Port Isolation Introduces the commands used for port isolation.
11 Port Security-Port Binding
Introduces the commands used for port security configuration
and port binding.
12 DLDP Introduces the commands used for DLDP configuration.
13 MAC Address Table
Management
Introduces the commands used for MAC address forwarding
table management.
14 Auto Detect Introduces the commands used for auto detect configuration.
15 MSTP Introduces the STP-related commands.
16 Routing Protocol
Introduces the commands used for routing protocol
configuration.
17 Multicast Introduces the commands used for multicast configuration.
18 802.1x and System Guard
Introduces the commands used for 802.1x and System Guard
configuration.
19 AAA
Introduces the commands used for AAA, RADIUS,
HWTACACS, and EAD configuration.
20 Web Authentication
Introduces the commands used for Web Authentication
configuration.
21 MAC Address Authentication
Introduces the commands used for MAC address
authentication configuration.
22 VRRP Introduces the commands used for VRRP configuration.
23 ARP Introduces the ARP-related commands.
24 DHCP
Introduces the commands used for DHCP server, DHCP
relay, and DHCP-snooping configuration.
25 ACL Introduces the ACL-related commands.