2-9
Use the undo igmp lastmember-queryinterval command to restore the default.
The IGMP last-member query interval is 1 second by default.
Related commands: igmp robust-count, display igmp interface.
Examples
# Set the IGMP last-member query interval to 3 seconds on VLAN-interface 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp lastmember-queryinterval 3
igmp max-response-time
Syntax
igmp max-response-time seconds
undo igmp max-response-time
View
Interface view
Parameters
seconds: Maximum response time in seconds in the IGMP general query messages, ranging from 1 to
25.
Description
Use the igmp max-response-time command to configure the maximum response time carried in the
IGMP general query messages.
Use the undo igmp max-response-time command to restore the default.
The maximum response time is 10 seconds by default.
Related commands: display igmp interface.
Examples
# On VLAN-interface 10, configure the maximum response time carried in IGMP general query
messages to 8 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp max-response-time 8
igmp proxy
Syntax
igmp proxy interface-type interface-number
undo igmp proxy
To Next Page
Loading...
Need help?
General