1-13
Examples
# Display the statistics on the packets dropped on Ethernet 1/0/1.
<Sysname> display packet-drop interface Ethernet 1/0/1
Ethernet1/0/1:
Packets dropped By GBP full or insufficient bandwidth: 0
Packets dropped By others: 0
# Display the summary statistics on the packets dropped on all the ports.
<Sysname> display packet-drop summary
All Ethernet interfaces:
Packets dropped By GBP full or insufficient bandwidth: 0
Packets dropped By others: 605
Table 1-6 Description on the fields of the display packet-drop command
Field Description
Packets dropped By GBP full or
insufficient bandwidth
Number of packets dropped because the GBP is full or the
bandwidth is insufficient.
Packets dropped By others Number of packets dropped because of other reasons.
display storm-constrain
Syntax
display storm-constrain [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
|: Uses a regular expression to filter the output configuration information.
begin: Displays the configurations that begin with the string specified by regular-expression.
exclude: Displays the configurations that do not contain the string specified by regular-expression.
include: Displays the configurations that contain the string specified by regular-expression.
regular-expression: Regular expression.
Description
Use the display storm-constrain command to display the storm control configurations.
Examples
# Display the storm control configurations.
<Sysname> display storm-constrain
Flow Statistic Interval: 5(second)
To Next Page
Loading...
Need help?
General