1-4
Examples
# Display the details about aggregation group 1.
<Sysname> display link-aggregation verbose 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation ID: 1, AggregationType: Manual, Loadsharing Type: NonS
Aggregation Description:
System ID: 0x8000, 000f-e214-000a
Port Status: S -- Selected, U -- Unselected
Local:
Port Status Priority Key Flag
--------------------------------------------------------------------------
Ethernet1/0/2 S 32768 1 {}
Ethernet1/0/3 U 32768 1 {}
Remote:
Actor Partner Priority Key SystemID Flag
--------------------------------------------------------------------------
Ethernet1/0/2 0 0 0 0x0000,0000-0000-0000 {}
Ethernet1/0/3 0 0 0 0x0000,0000-0000-0000 {}
Table 1-3 Description on the fields of the display link-aggregation verbose command
Field Description
Loadsharing Type Loadsharing type, including Loadsharing and Non-Loadsharing
Flags Flag types of LACP
Aggregation ID Aggregation group ID
Aggregation Description Aggregation group description string
AggregationType Aggregation group type
System ID Device ID
Port Status Port status, including selected and unselected
display lacp system-id
Syntax
display lacp system-id
View
Any view
Parameters
None
To Next Page
Loading...
Need help?
General