1-10
Description
Use the display ip routing-table radix command to display the route information in a tree structure.
Examples
<Sysname> display ip routing-table radix
Radix tree for INET (2) inodes 7 routes 5:
+-32+--{210.0.0.1
+--0+
| | +--8+--{127.0.0.0
| | | +-32+--{127.0.0.1
| +--1+
| +--8+--{20.0.0.0
| +-32+--{20.1.1.1
Table 1-3 Description on the fields of the display ip routing-table radix command
Field Description
INET Address suite
Inodes Number of nodes
Routes Number of routes
display ip routing-table statistics
Syntax
display ip routing-table statistics
View
Any view
Parameters
None
Description
Use the display ip routing-table statistics command to display the integrated routing information.
The integrated routing information includes the total number of routes, the number of active routes, the
number of routes added by protocols, and the number of routes deleted.
Examples
# Display the integrated route information.
<Sysname> display ip routing-table statistics
Routing tables:
Proto route active added deleted
DIRECT 24 4 25 1
STATIC 4 1 4 0
RIP 0 0 0 0
OSPF 0 0 0 0
To Next Page
Loading...
Need help?
General