1-54
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer realtime-accounting 51
timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameters
seconds: Response timeout time of RADIUS servers, ranging from 1 to 10 seconds.
Description
Use the timer response-timeout command to set the response timeout time of RADIUS servers.
Use the undo timer response-timeout command to restore the default response timeout time of
RADIUS servers.
By default, the response timeout time of RADIUS servers is 3 seconds.
Note that:
z After sending out a RADIUS request (authentication/authorization request or accounting request)
to a RADIUS server, the switch waits for a response from the server. The maximum time that the
switch can wait for the response is called the response timeout time of RADIUS servers, and the
corresponding timer in the switch system is called the response timeout timer of RADIUS servers.
You can use the timer response-timeout command to set the timeout time of this timer, and if the
switch gets no answer before the response timeout timer expires, it needs to retransmit the request
to ensure that the user can obtain RADIUS service.
z Appropriately setting the timeout time of this timer according to your network situation can improve
the performance of your system.
z This command has the same function with the timer command.
Related commands: radius scheme, retry.
Examples
# Set the response timeout time in RADIUS scheme radius1 to five seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer response-timeout 5
user-name-format
Syntax
user-name-format { with-domain | without-domain }
To Next Page
Loading...
Need help?
General