1-6
[Sysname] voice vlan aging 100
voice vlan enable
Syntax
voice vlan enable
undo voice vlan enable
View
Ethernet port view
Parameters
None
Description
Use the voice vlan enable command to enable the voice VLAN function on the port.
Use the undo voice vlan enable command to disable the voice VLAN function on the port.
By default, the voice VLAN function is disabled on all ports.
To have the voice VLAN function take effect on a port, you must enable it both globally and on the port.
Note that the operations are order independent.
Related commands: display voice vlan error-info, display voice vlan status.
Examples
# Enable the voice VLAN function on Ethernet1/0/2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] voice vlan enable
voice vlan legacy
Syntax
voice vlan legacy
undo voice vlan legacy
View
Ethernet port view
Parameters
None
Description
Use the voice vlan legacy command to enable the voice VLAN legacy function. This function realizes
the communication between H3C device and other vendors’ voice device by automatically adding the
voice VLAN tag to the voice data coming from other vendors’ voice device.
Use the undo voice vlan legacy command to disable the voice VLAN legacy function.
To Next Page
Loading...
Need help?
General