H3C S3600 Series Command Manual

1-28
Dhcp Release: 1
Dhcp Inform: 0
Boot Reply: 4
Dhcp Offer: 1
Dhcp Ack: 3
Dhcp Nak: 0
Bad Messages: 0
Table 1-4 Description on the fields of the display dhcp server statistics command
Field Description
Global Pool Statistics about global address pools
Interface Pool Statistics about interface address pools
Pool Number Number of address pools
Auto Number of the automatically bound IP addresses
Manual Number of the manually bound IP addresses
Expire Number of the expired IP addresses
Boot Request: 6
Dhcp Discover: 1
Dhcp Request: 4
Dhcp Decline: 0
Dhcp Release: 1
Dhcp Inform: 0
Statistics about the DHCP packets received from
DHCP clients
Boot Reply: 4
Dhcp Offer: 1
Dhcp Ack: 3
Dhcp Nak: 0
Statistics about the DHCP packets sent to DHCP
clients
Bad Messages Number of the error DHCP packets
display dhcp server tree
Syntax
display dhcp server tree { pool [ pool-name ] | interface [ interface-type interface-number ] | all }
View
Any view
Parameters
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string of 1 to 35
characters, is the name of an address pool. If you do not provide this argument, this command applies
to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not specify a VLAN
interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English