1-23
# Back up the current configuration of the whole fabric to the file aaa.cfg on the TFTP server whose IP
address is 1.1.1.253.
<Sysname> backup fabric current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to 1.1.1.253. Please wait...
File will be transferred in binary mode.
Copying file to remote tftp server. Please wait...
TFTP: 2029 bytes sent in 2 second(s).
File uploaded successfully.
Unit 7: Backup current configuration finished!
Unit 8: Backup current configuration finished!
restore startup-configuration
Syntax
restore { unit unit-id | fabric } startup-configuration from { source-addr | source-hostname }
filename.cfg
View
User view
Parameters
unit unit-id: Specifies the unit ID of a switch. The configuration of the specified unit will be restored.
fabric: Specifies to restore the configuration of the whole fabric system.
source-addr: IP address of a TFTP server.
source-hostname: Host name of a TFTP server
filename.cfg: Name of the configuration file to be restored to, a string of 5 to 56 characters (including the
extension .cfg).
Description
Use the restore unit unit-id startup-configuration from command to restore the startup configuration
of the specified switch from the configuration file backed on the specified TFTP server.
Use the restore fabric startup-configuration from command to restore the startup configuration of
the whole fabric from the configuration file backed on the specified TFTP server.
Examples
# Restore the startup configuration of unit 7 from the file aaa.cfg on the TFTP server with the IP address
1.1.1.253.
<Sysname> restore unit 7 startup-configuration from 1.1.1.253 aaa.cfg
Restore startup configuration from 1.1.1.253. Please wait...
File will be transferred in binary mode.
Downloading file from remote tftp server, please wait...
TFTP: 1958 bytes sent in 0 second(s).
To Next Page
Loading...
Need help?
General