4-6
display msdp sa-count
Syntax
display msdp sa-count [ as-number ]
View
Any view
Parameters
as-number: AS number, in the range of 1 to 65535.
Description
Use the display msdp sa-count command to display the number of (S, G) entries in the SA cache.
The debugging output of this command is available only after the cache-sa-enable command is
configured.
Examples
# Display the number of (S, G) entries in the SA cache.
<Sysname> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
100 3 3
Total Source-Active entries: 5
Table 4-4 display msdp sa-count command output description
Field Description
Number of cached Source-Active entries,
counted by Peer
Number of cached (S, G) entries per peer
Peer's Address
Address of the MSDP peer that sends SA
messages
Number of SA Number of (S, G) entries from this peer
Number of source and group, counted by AS
Number of cached (S, G) entries per AS
containing the original RP
AS
AS number. “?” indicates that the system was
unable to obtain the AS number.
Number of source Number of multicast sources from this AS
Number of group Number of multicast groups from this AS
To Next Page
Loading...
Need help?
General