1-29
Related commands: display ssh server.
Examples
# Configure to update the server's keys every 3 hours.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh server rekey-interval 3
ssh server timeout
Syntax
ssh server timeout seconds
undo ssh server timeout
View
System view
Parameters
seconds: Authentication timeout time, ranging from 1 to 120 (in seconds).
Description
Use the ssh server timeout command to set the authentication timeout time for SSH connections.
Use the undo ssh server timeout command to restore the default timeout time (that is, 60 seconds).
The configuration here will take effect at next login.
Related commands: display ssh server.
Examples
# Set the authentication timeout time to 80 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh server timeout 80
ssh user
Syntax
ssh user username
undo ssh user username
View
System view
Parameters
username: SSH user name, a string of 1 to 184 characters. It cannot contain any of these characters:
slash (/), backslash (\), colon (:), asterisk (*), question mark (?), less than sign (<), greater than sign (>),
and the vertical bar sign (|). In addition, the @ sign can appear up to once, the username part (that is,
To Next Page
Loading...
Need help?
General