1-6
display current-configuration vlan
Syntax
display current-configuration vlan [ vlan-id ] [ by-linenum ]
View
Any view
Parameters
vlan vlan-id: VLAN ID, in the range 1 to 4094.
by-linenum: Displays configuration information with line numbers.
Description
Use the display current-configuration vlan command to display the current VLAN configuration of
the switch.
Without the vlan-id argument specified, this command displays configuration information about all the
VLANs that exist on the switch.
If there are contiguous VLANs without any configuration, the system combines these VLANs together in
the format of vlan-id to vlan-id when displaying the VLAN configuration information.
Related commands: save, reset saved-configuration, display saved-configuration.
Examples
# Display the VLAN configuration information of the current switch.
<Sysname> display current-configuration vlan
#
vlan 1
#
vlan 5 to 69
#
vlan 70
description Vlan 70
#
vlan 71 to 100
#
return
display saved-configuration
Syntax
display saved-configuration [ unit unit-id ] [ by-linenum ]
View
Any view
To Next Page
Loading...
Need help?
General