1-2
[Sysname-hwping-administrator-icmp] count 10
datasize
Syntax
datasize size
undo datasize
View
HWPing test group view
Parameters
size: Size of a test packet in bytes. The value range varies with the test types.
Table 1-1 Value range of the HWPing test packets
Test type Value range (in bytes) Default (in bytes)
Jitter 68 to 8100 68
ICMP 4 to 8100 56
Udpprivate 4 to 8100 100
Udppublic 4 to 8100 100
Description
Use the datasize command to configure the size of a test packet in a test.
Use the undo datasize command to restore the default.
Examples
# Set the size of ICMP test packets to 50 bytes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type icmp
[Sysname-hwping-administrator-icmp] datasize 50
destination-ip
Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameters
ip-address: Destination IP address of a HWPing (pronounced Hua’Wei Ping) test.
To Next Page
Loading...
Need help?
General