1-31
Description
Use the display local-server statistics command to display the RADIUS message statistics about
local RADIUS server.
Related commands: local-server.
Examples
# Display the RADIUS message statistics about local RADIUS server.
<Sysname> display local-server statistics
On Unit 1:
The localserver packet statistics:
Receive: 30 Send: 30
Discard: 0 Receive Packet Error: 0
Auth Receive: 10 Auth Send: 10
Acct Receive: 20 Acct Send: 20
display radius scheme
Syntax
display radius scheme [ radius-scheme-name ]
View
Any view
Parameters
radius-scheme-name: Name of a RADIUS scheme, a string of up to 32 characters.
Description
Use the display radius scheme command to display configuration information about one specific or all
RADIUS schemes
Related commands: radius scheme.
Examples
# Display configuration information about all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName =system Index=0 Type=extended
Primary Auth IP =127.0.0.1 Port=1645
Primary Acct IP =127.0.0.1 Port=1646
Second Auth IP =0.0.0.0 Port=1812
Second Acct IP =0.0.0.0 Port=1813
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
To Next Page
Loading...
Need help?
General