EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #446 background imageLoading...
Page #446 background image
4-10
Field Description
SA cache entry uptime
Length of time for which the cached (S, G) entry has
been existing, in hours:minutes:seconds
SA cache entry expiry time
Length of time in which the cached (S, G) entry will
expire, in hours:minutes:seconds
Peering Uptime: 10 minutes
The time of the peering session between the local switch
and a Peer-RPF neighbor
Count of Peering Resets Count of session resets
originating-rp
Syntax
originating-rp interface-type interface-number
undo originating-rp
View
MSDP view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the originating-rp command to configure the address of the specified interface as the RP address
in SA messages.
Use the undo originating-rp command to cancel configuration.
By default, the RP address in an SA message is the RP address of the PIM domain.
Examples
# Configure the IP address of VLAN-interface 100 as the RP address in SA messages that will be
created by the switch.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] originating-rp Vlan-interface 100
peer connect-interface
Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
View
MSDP view

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals