H3C S3600 Series Command Manual

1-16
[Sysname] rule 0 permit source 192.168.0.108 0
[Sysname] snmp-agent group v3 v3group privacy acl 2001
In this case, when you use the display snmp-agent group command to display group information, you
can see that two groups with the name v3group are created, but their security modes are noAuthnoPriv
and AuthPriv respectively.
<Sysname> display snmp-agent group
Group name: v3group
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: ospf
Notifyview : ospf
Storage-type: ospf
Group name: v3group
Security model: v3 AuthPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
Acl:2001
snmp-agent local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameters
engineid: Engine ID, an even number of hexadecimal characters, in the range 10 to 64.
Description
Use the snmp-agent local-engineid command to set an engine ID for the local SNMP entity.
Use the undo snmp-agent local-engineid command to restore the default engine ID.
By default, the engine ID of an SNMP entity is formed by appending the device information to the
enterprise number. The device information can be determined according to the device, which can be an
IP address, a MAC address, or a user-defined string comprising of hexadecimal digits.
The configurations with the snmp-agent usm-user v3 and snmp-agent calculate-password
commands are related to engine ID. If you modify the engine ID, the corresponding configurations are
invalid for the new engine ID.
Examples
# Set the local SNMP entity engine ID to 123456789A.
<Sysname> system-view
System View: return to User View with Ctrl+Z.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English