1-2
Table 1-1 Description on the fields of the display dldp command
Field Description
dldp interval Interval for sending DLDP advertisement packets
dldp work-mode DLDP work mode
dldp authentication-mode DLDP authentication mode
cipher DLDP authentication password
dldp unidirectional-shutdown
DLDP action to be performed on detecting a unidirectional
link
dldp delaydown-timer Setting of the DelayDown timer
The port number of unit 1 with DLDP Number of the DLDP-enabled ports on unit 1
interface GigabitEthernet1/1/1 Port type and port number
dldp port state DLDP state of a port
dldp link state DLDP link state
The neighbor number of the port Number of the neighbor ports
neighbor mac address MAC address of a neighbor port
neighbor port index Neighbor port index
neighbor state Neighbor state, which can be two way or unknown.
neighbor aged time Neighbor aging time
dldp
Syntax
dldp { enable | disable }
View
System view, Ethernet port view
Parameters
None
Description
In system view,
Use the dldp enable command to enable DLDP for all the optical ports.
Use the dldp disable command to disable DLDP for all the optical ports.
In Ethernet port view,
Use the dldp enable command to enable DLDP for the current port.
Use the dldp disable command to disable DLDP for the current port.
This command applies to non-optical ports as well as optical ports.
By default, DLDP is disabled.
To Next Page
Loading...
Need help?
General