3-13
Field Description
Transfer distance(xx)
Transfer distance, with xx representing km for
single-mode transceivers and m for other
transceivers. If the transceiver supports multiple
transfer medium, every two values of the transfer
distance are separated by a comma. The
corresponding transfer medium is included in the
bracket following the transfer distance value.
The following are the transfer media:
z 9 um: 9/125 um single-mode fiber
z 50 um: 50/125 um multi-mode fiber
z 62.5 um: 62.5/125 um multi-mode fiber
z TP: Twisted pair
z CX4: CX4 cable
Digital Diagnostic Monitoring
Whether the digital diagnosis function is
supported, where:
z YES: supported
z NO: not supported
Vendor Name
Vendor name or vendor name specified of the
transceiver:
z The anti-spoofing transceiver customized by
H3C: H3C is displayed.
z Other transceivers: The original vendor name
is displayed.
Ordering Name Ordering name of the transceiver
display transceiver manuinfo interface
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver manuinfo interface command to display part of the electrical label
information of a single or all anti-spoofing pluggable transceivers customized by H3C.
Examples
# Display part of the electrical label information of the anti-spoofing pluggable transceiver customized
by H3C on interface GigabitEthernet 1/1/4.
<Sysname> display transceiver manuinfo interface gigabitethernet 1/1/4
GigabitEthernet1/1/4 transceiver manufacture information:
Manu. Serial Number : 213410A0000054000251
Manufacturing Date : 2007-07-28
Vendor Name : H3C
To Next Page
Loading...
Need help?
General