1-1
1 DHCP Server Configuration Commands
z Support for assigning a TFTP server address and bootfile name from the DHCP server to the client
with auto-configuration function is a new feature in this manual. For specific commands, see
bootfile-name, dhcp server bootfile-name, dhcp server tftp-server domain-name, dhcp server
tftp-server ip-address
, tftp-server domain-name, and tftp-server ip-address.
z DHCP-snooping option 82 is a new feature in this manual. For specific commands, see
dhcp-snooping information enable to dhcp-snooping information vlan remote-id.
z IP filtering is a new feature in this manual. For specific commands, see display ip source static
binding
, ip check source ip-address, and ip source static binding.
z DHCP packet rate limit is a new feature in this manual. For specific commands, see Rate Limit
Configuration Commands
.
The contents of this chapter are only applicable to the S3600-EI series among S3600 Series Ethernet
Switches.
DHCP Server Configuration Commands
accounting domain
Syntax
accounting domain domain-name
undo accounting domain
View
DHCP address pool view
Parameters
domain-name: Name of a domain, a string of 1 to 24 characters. (You can use the domain command to
create a domain.)
Description
Use the accounting domain command to enable the DHCP accounting function.
To Next Page
Loading...
Need help?
General