1-8
z If the prompt mode is set to alert, the following messages will be displayed when you delete a file:
<Sysname> delete unit1>flash:/te.txt
Delete unit1>flash:/te.txt?[Y/N]:y
......
%Delete file unit1>flash:/te.txt...Done.
The system waits for you to confirm for 30 seconds. If you do not input any confirmation in 30 seconds,
the system cancels this file operation, as shown in the following:
<Sysname> delete unit1>flash:/tt.txt
Delete unit1>flash:/tt.txt?[Y/N]:
<Sysname>
z If the prompt mode is set to quiet, the following messages will be displayed when you delete a file:
<Sysname> delete unit1>flash:/te.txt
....
%Delete file unit1>flash:/te.txt...Done.
Examples
# Set the prompt mode to quiet for file-related operations.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] file prompt quiet
fixdisk
Syntax
fixdisk device
View
User view
Parameters
device: Name of a device.
Description
Use the fixdisk command to restore space on the Flash memory.
In case that space on the Flash memory may become unavailable for reasons such as abnormal
operations, you can run this command to restore the space.
Examples
# Restore space on the Flash memory.
<Sysname> fixdisk unit1>flash:
Fixdisk flash: may take some time to complete.
%Fixdisk unit1>flash: completed.
To Next Page
Loading...
Need help?
General