H3C S3600 Series

2-3
Parameters
group-id: Monitor link group ID, ranging from 1 to 24.
Description
Use the monitor-link group command to create a monitor link group and enter monitor link group view.
If the monitor link group has been created, you enter the monitor link group view directly.
Use the undo monitor-link group command to remove a monitor link group.
After the monitor link group is configured, member ports of the monitor link group need to be configured.
Related commands: port monitor-link group, link-aggregation group, smart-link group, port.
Make sure that the monitor link group has no members before executing the undo monitor-link group
command.
Examples
# Create a monitor link group.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] monitor-link group 1
New Monitor Link Group has been created.
[Sysname-mtlk-group1]
port
Syntax
port interface-type interface-number { uplink | downlink }
undo port interface-type interface-number
View
Monitor link group view
Parameters
interface-type: Port type.
interface-number: Port number.
uplink: Specifies the specified port as the uplink port of the monitor link group
downlink: Specifies the specified port as the downlink port of the monitor link group
Description
Use the port command to configure the specified port as a member of the monitor link group.
Use the undo port command to remove the specified port from the current monitor link group.