1-1
1 AAA Configuration Commands
z The maximum length of a domain name is changed from 24 characters to 128 characters. See
domain.
z The configuration of ISP domain delimiter is added. See domain delimiter.
z The configuration of HWTACACS authentication scheme for user level switching is added. See
authentication super.
z The configuration of the MAC address format for the Calling-Station-Id field in RADIUS packets is
added. See
calling-station-id mode.
AAA Configuration Commands
access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameters
disable: Specifies not to limit the number of access users that can be contained in current ISP domain.
enable max-user-number: Specifies the maximum number of access users that can be contained in
current ISP domain. The max-user-number argument ranges from 1 to 2,072.
Description
Use the access-limit command to set the maximum number of access users that can be contained in
current ISP domain.
Use the undo access-limit command to restore the default setting.
By default, there is no limit on the number of access users in an ISP domain.
Because resource contention may occur among access users, there is a need to limit the number of
access users in an ISP domain so as to provide reliable performance to the current users in the ISP
domain.
To Next Page
Loading...
Need help?
General