4-17
reset msdp statistics
Syntax
reset msdp statistics [ peer-address ]
View
User view
Parameters
peer-address: Address of the MSDP peer whose statistics information will be cleared. If no MSDP peer
address is specified, the statistics information of all MSDP peers will be cleared.
Description
Use the reset msdp statistics command to clear the statistics information of one or all MSDP peers
without resetting the MSDP peer(s).
Related commands: reset msdp peer.
Examples
# Clear the statistics information about MSDP peer 125.10.7.6.
<Sysname> reset msdp statistics 125.10.7.6
shutdown
Syntax
shutdown peer-address
undo shutdown peer-address
View
MSDP view
Parameters
peer-address: Specifies an MSDP peer by its IP address.
Description
Use the shutdown command to shut down the connection with the specified MSDP peer.
Use the undo shutdown command to reactivate an MSDP peering connection.
By default, the connections with all MSDP peers are active.
Related commands: display msdp peer-status.
Examples
# Shut down the MSDP peer 125.10.7.6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] shutdown 125.10.7.6
To Next Page
Loading...
Need help?
General