1-41
Description
Use the tftp-server ip-address command to specify the TFTP server IP address in a global address
pool.
Use the undo tftp-server ip-address command to remove the TFTP server IP address from a global
address pool.
By default, no TFTP server address is specified.
Using the tftp-server ip-address command repeatedly will overwrite the previous configuration.
Related commands: dhcp server tftp-server ip-address.
Examples
# Specify the TFTP server address 10.1.1.1 in the global address pool 1.
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] dhcp server ip-pool 1
[Sysname-dhcp-pool-1] tftp-server tftp-server ip-address 10.1.1.1
voice-config
Syntax
voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id { disable | enable } | fail-over
ip-address dialer-string }
undo voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ]
View
DHCP address pool view
Parameters
ncp-ip ip-address: Specifies the IP address of the primary network calling processor.
as-ip ip-address: Specifies the IP address of the backup network calling processor.
voice-vlan vlan-id: Specifies the voice VLAN ID, in the range of 2 to 4094.
z disable: Disables the specified VLAN, meaning DHCP clients will not take this VLAN as their voice
VLAN.
z enable: Enables the specified VLAN, meaning DHCP clients will take this VLAN as their voice
VLAN.
fail-over ip-address dialer-string: Specifies the failover IP address and dialer string. The dialer-string is
a string of 0 to 39 characters, which can be 0 to 9, and “*”.
Description
Use the voice-config command to configure Option 184 and its sub-options in the global address pool.
Use the undo voice-config command to remove Option 184 and its sub-options from the global
address pool.
The DHCP server answers Option 184 and the corresponding sub-options only after the DHCP client
requests Option 184.
To Next Page
Loading...
Need help?
General