H3C S3600 Series Command Manual

1-3
Field Description
Log host
Information about the log host, including its IP
address, name and number of information
channel, language and level of the log host
Console
Information about the console port, including
name and number of its information channel
Monitor
Information about the monitor port, including
name and number of its information channel
SNMP Agent
Information about SNMP Agent, including name
and number of its information channel
Log buffer
Information about the log buffer, including its
state (enabled or disabled), its maximum size,
current size, current messages, information
channel name and number, number of dropped
messages, and number of overwritten messages
Trap buffer
Information about the trap buffer, including its
state (enabled or disabled), maximum size,
current size, current messages, channel number
and name, number of dropped messages, and
number of overwritten messages
Information timestamp setting:
Information about the time stamp setting,
showing the time stamp format of the log, trap
and debugging information
IRF SWITCH OF Device--Unit>1
Information about the information output state of
the device (enabled or disabled), showing
whether the log, trap and debugging information
output are enabled on the device
display logbuffer
Syntax
display logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameters
unit-id: Unit ID of the device.
level severity: Specifies an information severity level. The severity argument ranges from 1 to 8.
Table 1-2 Severity level defined in the information center
Severity Severity value Description
emergencies 1 The system is unavailable.
alerts 2
Information that demands
prompt reaction
critical 3 Critical information

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English