H3C S3600 Series

4-12
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description router CstmrA
peer mesh-group
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group
View
MSDP view
Parameters
peer-address: IP address of the MSDP peer to be added into the mesh group.
name: Name of the mesh group, case-sensitive and containing 1 to 32 characters.
Description
Use the peer mesh-group command to add an MSDP peer to a mesh group.
Use the undo peer mesh-group command to cancel the configuration.
By default, an MSDP peer does not belong to any mesh group.
Examples
# Configure the MSDP peer with the address of 125.10.7.6 as a member of mesh group Grp1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 mesh-group Grp1
peer minimum-ttl
Syntax
peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
View
MSDP view
Parameters
peer-address: IP address of the MSDP peer to which the minimum TTL setting will apply.
ttl-value: Minimum required TTL value, ranging from 0 to 255.
Description
Use the peer minimum-ttl command to configure the minimum required TTL value for a multicast
packet encapsulated in an SA message to be forwarded to the specified MSDP peer.