EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1164 background imageLoading...
Page #1164 background image
1-27
Related commands: password, ftp-operation.
z To perform an FTP test successfully, the configured username must be consistent with the
username configured on the FTP server.
z This command applies to FTP tests only.
Examples
# Configure the username for logging into the FTP server in an FTP test as administrator.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
[Sysname-hwping-administrator-ftp] username administrator
HWPing Server Commands
z A HWPing server is required for only jitter, TCP, and UDP tests.
z You are not recommended to configure HWPing jitter/UDP/TCP servers on ports 1 through 1023
(well-known ports); otherwise, HWPing probes may fail or the services corresponding to these
ports may be unavailable.
hwping-server enable
Syntax
hwping-server enable
undo hwping-server enable
View
System view
Parameters
None
Description
Use the hwping-server enable command to enable the HWPing server function.
Use the undo hwping-server enable command to disable the HWPing server function.

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals