H3C S3600 Series

1-12
Use the undo filename command to remove the configured file name.
By default, no file name is configured for FTP tests.
Related commands: username, password, ftp-operation.
The filename command applies to FTP tests only.
Examples
# Specify to transmit config.txt between HWPing client and FTP server in an FTP test.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
[Sysname-hwping-administrator-ftp] filename config.txt
frequency
Syntax
frequency interval
undo frequency
View
HWPing test group view
Parameters
interval: Automatic test interval in seconds. It ranges from 0 to 65,535.
Description
Use the frequency command to configure the time interval of performing automatic tests.
Use the undo frequency command to restore the default.
If interval is configured greater than 0, the system performs automatic tests at this interval.
interval defaults to 0, which means no automatic test is performed by default.
Related commands: count.