1-12
**Destination: 1.1.1.1 Mask: 255.255.255.255
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Cost: 0/0
**Destination: 2.2.2.0 Mask: 255.255.255.0
Protocol: #DIRECT Preference: 0
*NextHop: 2.2.2.1 Interface: 2.2.2.1(Vlan-interface2)
State: <Int ActiveU Retain Unicast>
Age: 20:08:05 Cost: 0/0
For descriptions of route states, see Table 1-2.
Table 1-5 lists the statistics of the routing table.
Table 1-5 Description on the fields of the display ip routing-table verbose command
Field Description
Holddown Number of suppressed routes
Delete Number of deleted routes
Hidden Number of hidden routes
reset ip routing-table statistics protocol
Syntax
reset ip routing-table statistics protocol { all | protocol }
View
User view
Parameters
all: Specifies all protocols.
protocol: Specifies a protocol, which can be direct, ospf, ospf_ase, ospf_nssa, rip, or static.
Description
Use the reset ip routing-table statistics protocol command to clear the statistics of routes in a routing
table.
Examples
# Before executing the reset ip routing-table statistics protocol command, use the display ip
routing-table statistics command to display the routing statistics:
<Sysname> display ip routing-table statistics
Routing tables:
Proto route active added deleted
DIRECT 4 4 12 8
STATIC 0 0 0 0
RIP 0 0 0 0
OSPF 0 0 0 0
To Next Page
Loading...
Need help?
General