To Next Page

To Previous Page

1-8

H3C Comware Platform Software.

Comware Software, Version 3.10

S3600-28P-EI S3600-EI-1545

Cluster : Candidate switch

Peer MAC Peer Port ID Native Port ID Speed Duplex

000f-e20f-1234 Ethernet3/0/21 Ethernet1/0/22 100 FULL

5600-0000-3334 GigabitEthernet1/0/32 Ethernet1/0/4 100 FULL

Table 1-4 Description on the fields of display ntdp device-list verbose

Field Description

Hostname System name of a device collected by NTDP

MAC MAC address of the collected device

Hop Hops from this device to the collected device

Platform Software platform of the collected device

IP address and mask length of the cluster management VLAN

interface on the collected device

Version Software version of the collected device

Cluster The role of the collected device for the cluster

Peer MAC

MAC address of a neighbor device connected to the collected

device

Peer Port ID

Index of the port on the neighbor device connected to the

collected device

Native Port ID

Index of the port on the collected device connected to the

neighbor device

Speed Speed of the neighbor device port

Duplex Duplex mode of the neighbor device port

ntdp enable

Syntax

ntdp enable

undo ntdp enable

View

System view, Ethernet port view

Parameters

None

Description

Use the ntdp enable command to enable NTDP globally or on a port.

H3C S3600 Series Command Manual

Other manuals for H3C S3600 Series